AMI-S - Immersion Pocket for Temp. Sensor
Stainless steel bulb well (immersion pocket) for temperature sensors
The AMI bulb wells or immersion pockets are used with temperature sensors and transmitters (SD-T, SDB-T, SDC-T1 series) to measure the temperature of liquids. The wells are installed in a standard 1/2" NPT or 172" BSP threaded saddle.
The sensors are inserted into the well and are spring loaded. The front part is filled with temperature conducting paste.
Important: Sensor tip must reach tip of well to accurately measure media temperature.
Features
- Stainless steel bulb well / immersion pocket: plug and play sensor installation
- With fixing screw
- Fits into a 1/2" NPT or 1/2" BSP threaded saddle
- Compatible with corrosive and non-corrosive liquids
- Facilitates quick mounting and replacement of sensors
- For media temperatures up to 400 °C
Ordering
| Item name | Item code | Option | Description |
| AMI-S5-1 | 40-51 0012 | 5 cm | Stainless steel pocket SS304 with 1/2" NPT thread for SDB and SD type of sensors |
| AMI-S7-1 | 40-51 0013 | 7.5 cm | |
| AMI-S10-1 | 40-51 0014 | 10 cm | |
| AMI-S15-1 | 40-51 0015 | 15 cm | |
| AMI-S20-1 | 40-51 0016 | 20 cm | |
| AMI-S30-1 | 40-51 0017 | 30 cm | |
| AMI-S40-1 | 40-51 0018 | 40 cm | |
| AMI-S5-2 | 40-51 0081 | 5 cm | Stainless steel pocket SS304 with 1/2" BSP thread for SDB and SD type of sensors |
| AMI-S10-2 | 40-51 0082 | 10 cm | |
| AMI-S20-2 | 40-51 0083 | 20 cm | |
| AMI-S40-2 | 40-51 0084 | 40 cm | |
Downloads
Operation Manual
Install Sheet
Application Notes
Certificates
Archive