SDB-T - Duct Mounted

#

Passive temperature sensor for duct mounting with conduit connector

The SDB-T measures temperature by use of a NTC, PT or NI sensing element. The sensing element is either a glass packed thermistor with a negative temperature coefficient, a platinum film or a nickel thin layer based probe. Its resistance changes according to the temperature. The change follows a specified curve.

Applications
 

  • On return air ducts to measure room temperatures
  • On supply air ducts to measure heating/cooling supply air
  • In heat exchangers and air handling units to control heating/cooling coils
  • As frost protection sensor

Features

  • Thermistor, PT and NI sensing elements to fit your system
  • Simple and secure installation
  • Wide range of temperature probes
  • Compact size and modern design

Ordering

12 cm probe length

 Item name  Item code  Probe type   Description  Length
 SDB-Tn3-12-1  40-200123  NTC 3kΩ at 25 ºC

  B25/50: 3935

 12 cm

 SDB-Tn10-12-1  40-200124  NTC 10kΩ at 25 ºC    B25/50: 3935
 SDB-Tn11-12-1  40-200125   B25/50: 3630
 SDB-Tn12-12-1  40-200126   B25/50: 3380
 SDB-Tn20-12-1  40-200127  NTC 20kΩ at 25 ºC   B25/50: 4200
 SDB-Tn100-12-1  40-200128  NTC 100kΩ at 25 ºC   B25/50: 4200
 SDB-Tp1-12-1  40-200129  PT100   EN 60751
 SDB-Tp2-12-1  40-200130  PT1000   EN 60751
 SDB-Tk5-12-1  40-200131  NI1000, 5000 ppm/K   DIN 43760
 SDB-Tk6-12-1  40-200199  NI1000, 6180 ppm/K   DIN 43760
         
 20 cm probe length        
 Item name  Item code  Probe type  Description  Length
 SDB-Tn3-20-1  40-200132  NTC 3kΩ at 25 ºC  B25/50: 3935  20 cm
 SDB-Tn10-20-1  40-200133  NTC 10kΩ at 25 ºC   B25/50: 3935
 SDB-Tn11-20-1  40-200134  B25/50: 3630
 SDB-Tn12-20-1  40-200135  B25/50: 3380
 SDB-Tn20-20-1  40-200136  NTC 20kΩ at 25 ºC  B25/50: 4200
 SDB-Tn100-20-1  40-200137  NTC 100kΩ at 25 ºC  B25/50: 4200
 SDB-Tp1-20-1  40-200138  PT100  EN 60751
 SDB-Tp2-20-1  40-200139  PT1000  EN 60751
 SDB-Tk5-20-1  40-200140  NI1000, 5000 ppm/K  DIN 43760
 SDB-Tk6-20-1  40-200200  NI1000, 6180 ppm/K  DIN 43760

Accessories

#
AMC-1 - Cable Gland
For indoor, outdoor and duct transmitters
#
AMC-2 - Conduit Connector
For indoor, outdoor and duct transmitters
#
AMI-S - Immersion Pocket for Temp. Sensor
Stainless steel bulb well (immersion pocket) for temperature sensors

Downloads

Operation Manual

Install Sheet

Application Notes

Certificates

Archive