SDB-T

Passive temperature sensor for duct mounting with conduit connector
The SDB-T measures temperature by use of a NTC, PT or NI sensing element. The sensing element is either a glass packed thermistor with a negative temperature coefficient, a platinum film or a nickel thin layer based probe. Its resistance changes according to the temperature. The change follows a specified curve.
Applications
-
On return air ducts to measure room temperatures
-
On supply air ducts to measure heating/cooling supply air
-
In heat exchangers and air handling units to control heating/cooling coils
- As frost protection sensor
Features
- Thermistor, PT and NI sensing elements to fit your system
- Simple and secure installation
- Wide range of temperature probes
- Compact size and modern design
Ordering
12 cm probe length
| Item name | Item code | Probe type | Description | Length |
| SDB-Tn3-12-1 | 40-200123 | NTC 3kΩ at 25 ºC |
B25/50: 3935 |
12 cm |
| SDB-Tn10-12-1 | 40-200124 | NTC 10kΩ at 25 ºC | B25/50: 3935 | |
| SDB-Tn11-12-1 | 40-200125 | B25/50: 3630 | ||
| SDB-Tn12-12-1 | 40-200126 | B25/50: 3380 | ||
| SDB-Tn20-12-1 | 40-200127 | NTC 20kΩ at 25 ºC | B25/50: 4200 | |
| SDB-Tn100-12-1 | 40-200128 | NTC 100kΩ at 25 ºC | B25/50: 4200 | |
| SDB-Tp1-12-1 | 40-200129 | PT100 | EN 60751 | |
| SDB-Tp2-12-1 | 40-200130 | PT1000 | EN 60751 | |
| SDB-Tk5-12-1 | 40-200131 | NI1000, 5000 ppm/K | DIN 43760 | |
| SDB-Tk6-12-1 | 40-200199 | NI1000, 6180 ppm/K | DIN 43760 | |
| 20 cm probe length | ||||
| Item name | Item code | Probe type | Description | Length |
| SDB-Tn3-20-1 | 40-200132 | NTC 3kΩ at 25 ºC | B25/50: 3935 | 20 cm |
| SDB-Tn10-20-1 | 40-200133 | NTC 10kΩ at 25 ºC | B25/50: 3935 | |
| SDB-Tn11-20-1 | 40-200134 | B25/50: 3630 | ||
| SDB-Tn12-20-1 | 40-200135 | B25/50: 3380 | ||
| SDB-Tn20-20-1 | 40-200136 | NTC 20kΩ at 25 ºC | B25/50: 4200 | |
| SDB-Tn100-20-1 | 40-200137 | NTC 100kΩ at 25 ºC | B25/50: 4200 | |
| SDB-Tp1-20-1 | 40-200138 | PT100 | EN 60751 | |
| SDB-Tp2-20-1 | 40-200139 | PT1000 | EN 60751 | |
| SDB-Tk5-20-1 | 40-200140 | NI1000, 5000 ppm/K | DIN 43760 | |
| SDB-Tk6-20-1 | 40-200200 | NI1000, 6180 ppm/K | DIN 43760 |
Accessories

AMC-1 - Cable Gland
For indoor, outdoor and duct transmitters

AMC-2 - Conduit Connector
For indoor, outdoor and duct transmitters

AMI-S - Immersion Pocket for Temp. Sensor
Stainless steel bulb well (immersion pocket) for temperature sensors
Downloads
Spec Sheet
Operation Manual
Engineering Manual
Engineering manuals including parameter access codes are available to approved partners only: Partner Area / Become a Partner
Install Sheet
Application Notes
Certificates
