SRD2 - NEW - Wall Mounted

Wall-mounted programmable indoor controller and transmitter (X2 OS) with temperature and humidity sensor with optional CO2, VOC air quality, dust particle sensor, color display, IR sensor and communication

The SRD2 is a programmable controller and transmitter with communication capabilities. Each control loop may use 2 PI sequences and 2 binary stages. The SRD2 comes with a built-in isolated RS485 communication interface that allows peer-to-peer communication with an operation terminal such as OPT1-(2TH)-VC. An optional built-in color display and touch buttons provides a perfect and flexible way to interact with the user.

Communication supports BACnet or Modbus. There is also a Wi-Fi communication option available which supports Modbus TCP and BACnet/IP. An embedded webserver provides a web interface to access the controller in order to change the connection settings and to operate the controller.

Complete parameter sets may be copied by use of an accessory called AEC-PM2 or exchanged with a PC and the EasySet program using an RS485-USB converter or via Wi-Fi.

The SRD2 uses the Vector Controls universal and flexible X2 operating system and is preconfigured as described in the manual.

Applications

• Ventilation control 
• Temperature control 
• Air humidifier and dehumidifier
• CO2 air quality control 
• VOC air quality control 
• Dust particle air quality control
• Motion detection action

Type Overview (see ordering for details)

  

  

Dimensions, mm (inch)
 

  

Features

• Two universally configurable control loops: 
  • Functions for dehumidifying, set point shift and cascade control 
  • Multiple auxiliary functions: heat-cool auto changeover, automatic enable, set point compensation 
  • Free heating and cooling with economizer function based on enthalpy or temperature 
  • Differential, averaging, min and max functions, enthalpy and dew point calculations 
  • Transmitter function for sensors and set points 
• Measures:
  • Temperature
  • Humidity
  • CO2
  • VOC air quality
  • Dust particles (PM1.0, PM2.5, PM10) 
• A passive infrared sensor (-IR type) which can be used for motion detection (occupied / unoccupied)
• Color display with backlight and touch button operation (-OP type)
• Built-in humidity and temperature sensor (-TH type), CO2 sensor (-C type), VOC sensor (-Q type), 
  dust particle sensor (-D type) 
• 3 analogue voltage outputs (VDC) and one relay with a normally open and a normally closed contact (SPDT) 
• 8 freely assigned alarm conditions, selectable state of outputs and sounds on alarm condition 
• Serial Modbus RTU/ASCII or BACnet MS/TP via isolated RS485 
• Modbus TCP or BACnet/IP via Wi-Fi 
• Webserver for SRD2 operation from computer / mobile device or via “EasyX2” desktop/mobile app 
• Password protected programmable user and control parameters 
• EasySet access over TCP/IP for configuration (Wi-Fi interface required) 

Ordering

Accessories

Temperature Sensors

Sensing elements or accessories for temperature sensors

X2-Operation Terminals

Remote and built-in operation terminals

AEC-PM2 - Memory

External memory for parameter sets for X2-series

AEC-USB - USB to RS-485 Converter Cable Kit

For programming X2-devices with EasySet tool

Downloads

Operation Manual

• 70-00-0994B X2 operations manual touch button display.pdf
• 70-00-0979B SRD2.pdf
• 70-00-0952A X2 Web Interface Manual.pdf

Install Sheet

• 70-00-0978A-20230912 SRD2 Install.pdf
• 70-00-0990B Wiring Guide.pdf

Application Notes

• 70-00-0737A X2-Engineering Manual V1-6.pdf
• 70-00-0218C X2-BACnet V1_3.pdf
• 70-00-0925B X2-ModbusTCP V1_1.pdf
• 70-00-0899A X2 BACnetIP V1_1.pdf
• 70-00-0900A X2 Wi-Fi and Ethernet Communication Manual V1_1.pdf
• 70-00-0636_Application-Note_X2_parameter_access_through_BACnet.pdf
• 70-00-0635_Application-Note X2_parameter_access_MODBUS_1-2.pdf
• 70-00-0290_X2-MOD_V1-2.pdf

Certificates

• CE Certificate SRD2-xxx.pdf

Archive

• 70-00-0994A X2 operations manual touch button display.pdf