X2 - V1.6 New

Vector Controls X2 Operating System Version 1.6

X2-Operating System

The X2-Operating system consists of a standardized method to operate and configure a range of controllers and sensors. The system is built on pre-programmed control and function blocks which can be configured using a parameterization routine. All X2-type products use the same philosophy and can be configured using the same tools and methods. All X2-type products can be configured using the standard operation terminals, the PC based tool EasySet™ from Vector Controls or remotely through bus communication where available.

> Read more about the EasySet tool

> Read more about the EasyX2 App

X2-Introduction

• X2 OS Introduction 2022.pdf
• Watch video: Vector Controls X2 Operating System

X2-Documentation

Detailed setup, configuration and operation instructions can be fond in the tabs below.

X2 Engineering

Engineering Guidelines

• 70-00-0737A X2-Engineering Manual V1-6.pdf

IP Communication Guidelines

• 70-00-0900A X2 Wi-Fi and Ethernet Communication Manual V1_1.pdf

Archive

X2 Operation

Operation Manuals

• 70-00-0950B X2 operations manual button displays.pdf
• 70-00-0951B X2 operations manual touch displays.pdf
• 70-00-0952A X2 Web Interface Manual.pdf
• 70-00-0994A X2 operations manual touch button display.pdf
• 70-00-0994B X2 operations manual touch button display.pdf

Archive

X2 BACnet

BACnet Communication Guidelines

• 70-00-0218_X2-BACnet_V1-2.pdf
• 70-00-0218C X2-BACnet V1_3.pdf
• 70-00-0636_Application-Note_X2_parameter_access_through_BACnet.pdf
• 70-00-0899A X2 BACnetIP V1_1.pdf
• 70-00-0977B_CS1-BAC-002_PICS.pdf

Archive

X2 Modbus

Modbus Communication Guidelines

• 70-00-0290_X2-MOD_V1-2.pdf
• 70-00-0635_Application-Note X2_parameter_access_MODBUS_1-2.pdf
• 70-00-0925B X2-ModbusTCP V1_1.pdf

Archive

X2 Version History

Version 1.6 R1 (June 2023)

• SRD2 product type added.
• SRD2 idle display added.
• Low, medium and high-level display function added (SRD2 only).
• Passive infrared sensor PIR and dust sensor support added.
• Passive input description RT/DI (NTC) improved.
• Light control mode for motion detection added and description of toggle and dimmer mode updated.
• Time scheduling description improved.
• Small improvements and bug fixes.