SOD-T - Outdoor
Passive temperature sensor for outdoor mounting with conduit connector
The SOD-T measures the temperature by use of a glass packed thermistor with a negative temperature coefficient (NTC), a platinum film (PT) or a nickel thin layer (NI) based probe. Its resistance changes according to the temperature. The change follows a specified curve.
Applications
- Outside air temperature measurements for summer/winter compensation, energy optimization and economizer
- Frost protection control of outside air dampers
Features
- Outdoor temperature measurement
- Thermistor, NI and PT sensing elements to fit your system
- Simple and secure installation
- Wide range of temperature probes
Ordering
Per default, a cable gland AMC-1 is included for cables Ø 4-8 mm (AWG 6-1).
Item name | Item code | Probe type | Description |
SOD-Tn3-1 | 40-200141 | NTC 3kΩ at 77 °F (25 °C) | B25/50: 3935 |
SOD-Tn10-1 | 40-200108 | NTC10kΩ at 77 °F (25 °C) | B25/50: 3935 |
SOD-Tn11-1 | 40-200143 | B25/50: 3630 | |
SOD-Tn12-1 | 40-200144 | B25/50: 3380 | |
SOD-Tn20-1 | 40-200145 | NTC 20kΩ at 77 °F (25 °C) | B25/50: 4200 |
SOD-Tn100-1 | 40-200146 | NTC 100kΩ at 77 °F (25 °C) | B25/50: 4200 |
SOD-Tp1-1 | 40-200147 | PT100 | EN 60751 |
SOD-Tp2-1 | 40-200148 | PT1000 | EN 60751 |
SOD-Tk5-1 | 40-200149 | NI1000, 5000 ppm/K | DIN 43760 |
Accessories
AMC-1 - Cable Gland
For indoor, outdoor and duct transmitters
AMC-2 - Conduit Connector
For indoor, outdoor and duct transmitters
Downloads
Operation Manual
Install Sheet
Application Notes
Certificates
Archive