AMI-S - Immersion Pocket for Temp. Sensor

Image description

Stainless steel bulb well (immersion pocket) for temperature sensors

The AMI bulb wells or immersion pockets are used with temperature sensors and transmitters (SD-T, SDB-T, SDC-T1 series) to measure the temperature of liquids. The wells are installed in a standard 1/2" NPT or 172" BSP threaded saddle.

The sensors are inserted into the well and are spring loaded. The front part is filled with temperature conducting paste.

Important: Sensor tip must reach tip of well to accurately measure media temperature.

Features

 

  • Stainless steel bulb well / immersion pocket: plug and play sensor installation
  • With fixing screw
  • Fits into a 1/2" NPT or 1/2" BSP threaded saddle
  • Compatible with corrosive and non-corrosive liquids
  • Facilitates quick mounting and replacement of sensors
  • For media temperatures up to 400 °C

 

Ordering

 

 Item name  Item code   Option  Description
 AMI-S5-1  40-51 0012   5 cm  Stainless steel pocket SS304 with 1/2" NPT thread
 for SDB and SD type of sensors
 AMI-S7-1  40-51 0013   7.5 cm
 AMI-S10-1  40-51 0014   10 cm
 AMI-S15-1  40-51 0015   15 cm
 AMI-S20-1  40-51 0016   20 cm
 AMI-S30-1  40-51 0017   30 cm
 AMI-S40-1  40-51 0018   40 cm
 AMI-S5-2  40-51 0081   5 cm  Stainless steel pocket SS304 with 1/2" BSP thread
 for SDB and SD type of sensors
 AMI-S10-2  40-51 0082  10 cm
 AMI-S20-2  40-51 0083  20 cm
 AMI-S40-2  40-51 0084  40 cm
       
       

  

Downloads

Operation Manual

Install Sheet

Application Notes

Certificates

Archive