AER-HL1
Dew point switch to prevent or detect dew point on pipes and surfaces
The AER-HL1 is a stand-alone electronic detector. It features one internal humidity sensor with 3% accuracy, an additional temperature sensor to measure media temperature and a latching relays with one normally open and one normally closed contact.
Applications
- Prevents condensation for chilled ceilings and beams as well as air handling and fan coil units
Features
- Supervises dew point or humidity level and switches a relay if dew point drops below or relative humidity exceeds the defined limit or if device is without power
- Stops condensation bevor it happens
- Very low power consumption:
- Relays switching for outputs up to 200 W
- Password protected programmable humidity limits
- Selectable averaging signal
- Optional external display (OPA-S) with minimum / maximum humidity limits
- Status LED
Ordering
Item name | Item code | Description |
---|---|---|
AER-HL1 | 40-500071 | 1 internal humidity input 1 relay NO/NC |
Accessories
OPA-S - Remote Display
Operation and display for intelligent transmitters
Downloads
Operation Manual
Install Sheet
Application Notes
Certificates
Archive