MZ3-FS-V01 (Snapfix)

VDC operating terminal for up to 3 positions. Compatible with the Swiss installation standards from Feller with EDIZIOdue® or EDIZIO.liv® compatible with the SNAPFIX® mounting plate..
The MZ3-V01 is a microprocessor controlled precision step switch with touch panel. The step switch fits onto the Feller EDIZIOdue® and EDIZIO.liv® installation system and is supplied without a frame and mounting plate.
Through parameters the step switch is configured. Settings such as switching levels for each step may be adjusted. The configuration is performed using the programming device OPA-S. Configuration can as well be updated using an accessory called AEC-PM2.
Applications
- Comfort ventilation,
- Damper or valve positions,
- Control of blinds
- etc.
Features
- Electronic 3-step switch with touch panel
- Suitable for Feller SNAPFIX® installation system
- Manual operation with up to 3 Levels: MIN, MID, MAX
- Automatic reset of the level MAX to MID
- One 0…10 VDC output to output defined step levels
- Password protected settings
- Copy of settings with accessory (AEC-PM2)
Ordering
Item name | Item code | Variant | Description |
MZ3-FS-V01-B3-T3-W | 40-100303 |
Blue LED, white frame |
3-step switch for Feller SNAPFIX® system with one 0-10 VDC output and touch panel. |
AMM-DS-W | 40-510104 | White | Feller EDIZIOdue® frame with SNAPFIX®-mounting plate |
AMM-LS-W | 40-510105 | White | Feller EDIZIO.liv® frame with SNAPFIX®-mounting plate |
OPA-S | 40-500006 | Programming and display device |
LDC display for surface mounting or handheld operation |
AEC-PM2 | 40-500130 | Memory device | Used to copy device configuration |
Accessories

AMM-DS-W Frame
Feller EDIZIOdue® Frame with SNAPFIX® mounting plate

AMM-LS-W Frame
Feller EDIZIO.liv® Frame with SNAPFIX® mounting plate

OPA-S - Remote Display
Operation and display for intelligent transmitters

AEC-PM2 - Memory
External memory for parameter sets for X2-series
Downloads
Operation Manual
Install Sheet
Application Notes
Certificates
Archive